Dingfu stainless steel decoration engineering manufacturer tells you the production process of metal LOGO labels. As the current technology is better, the production process of the labels will continue to improve the quality and technological level with the improvement of technology, and the electroplating layer on the surface of the electroplated parts will be peeled off. The process that comes down as a product is called electroforming process. The labels produced by the electroforming process are called electroforming labels.

Electroforming label is a relatively new generation of labeling industry, and the characteristic of electroforming label is that there is no carrier. In the past, various labels made the characters and patterns displayed on the label on the carrier, and then used different heights, different reflectance and different colors to distinguish the main body and the carrier of the label, so as to achieve the purpose of highlighting the main body. Because the electroforming label has no carrier, all the content shown on the label is the main body, and the main content is directly pasted on the object to be labeled, and it is integrated with the object to be labeled, and there is no added feeling. The effect displayed by the label is outstanding and complete. This is unmatched by various signs in the past. The second feature of electroforming labels is the simplicity of the process. Since it is produced by electroforming, no mold is required. Save money and time. After the production unit receives the order, it can usually produce samples on the same day and produce the products the next day. The entire production process only needs a screen printing platform, oven, exposure machine, electroplating tank and other basic equipment. The third characteristic of electroforming labels is the slight environmental pollution. Compared with other methods of producing metal signs, electroforming signs have a slight environmental pollution. Because it does not need to be corroded, there is no etching pollution; the area required for electroforming is about one-seventh of the area of ​​conventional signs, so the pollution of electroforming labels is only one-seventh of the pollution of conventional electroplating labels, and The wastewater is pure sulfate wastewater, which is easy to treat. Material saving is also a feature of electroforming labels. Because there is no carrier, according to tests, the electroforming method consumes only one-seventh of the material used to produce the same size metal label.

Application scope of electroforming label: electroforming label is made of copper, nickel and gold casting and plating. The surface is bright, the periphery is smooth, the graphics are accurate, and the weather resistance is particularly good. The electroforming label production process is simple and the price is not high. Therefore, it is said: electroforming label is a label with a low price and a higher grade. In addition, it uses a strong self-adhesive paste, which is convenient to use, so the use surface is relatively broad. It is especially suitable for making inscriptions and decorative stickers for small and medium-sized light industrial products such as metal surfaces, painted surfaces, plastics, wood, leather, etc. The combined use of electroforming technology and refractive, three-dimensional, crystal glue and other processes can be more effective.

The production process of electroforming labels is: printing plate, electroplating, peeling and gluing. Exposure: The electroformed master is made of a stainless steel plate that is easy to peel off after plating. After degreasing and washing, it is printed with a photoimageable electroplating resistant photosensitive adhesive. After the exposure of the plate is developed, post-exposure treatment is carried out to increase the plating resistance of the photosensitive adhesive . Electroforming: Clamp the processed stainless steel plate with an image with a special clamp, and place it in a rapid electroforming nickel tank for electroforming. The electroforming time and current size depend on the area and thickness of the object to be cast. Peeling: Wash and dry the cast stainless steel plate, and then use a transfer film to completely peel off the electroplated text and pattern. Gluing: There are two methods: one is to use the screen printing method to screen print the sticker on the back of the electroformed text and pattern, and then use it after drying; the second is to print the sticker on the transfer paper first. After drying, paste the electroformed characters and patterns on the transfer film onto the adhesive film, and transfer the self-adhesive film to the back of the electroformed characters and patterns after pressing.

Metal split self-adhesive labels are the substitute products for self-adhesive labels, aluminum labels, copper labels, iron labels and other labels in the future. It is a better decorative sign in the current market. The product is very thin and thick. It has great design freedom, separable and connectable fonts, smooth edges without burrs, gorgeous colors, bright surface, strong three-dimensional effect, smooth overall, and good weather resistance. In addition, there are also nickel sheet thin labels and stainless steel labels for metal LOcO labels. These two production processes are very simple and will not be described.

Guangzhou Dingfu Metal Products Co., Ltd. is a manufacturer of decorative metal products and furniture supporting metal, which provides one-stop metal decoration engineering services for luxury stores, hotels, casinos in Macau, villas, clubs, etc. The main products are metal hangers, bag display racks, metal laminates, metal logos, metal frames for windows, door covers, floor panels, etc.